The Tundra has some serious power, take advantage of it with this 5" Lift Kit that makes your truck an off road machine. Iron knuckles and heavy-duty, boxed crossmembers integrate with differential mounts to lock everything together. Fits 2007 - 2015 Toyota Tundra.
- High strength crossmembers to correct lower control arm positioning
- Ductile iron steering knuckles to corect steering geometry and maintain ESC system compatibility
- Lower strut extensions to provide lift and install easily
- Weld-in chassis plates add strength and rigidity
- Rear lift blocks and u-bolts to lift and level the stance
- Sway bar, brake line, and bump stop relocation brackets to correct operating angles
Information:
Fitment: Will NOT work on 2015 TRD Pro Models.
Fitment: Will work with Bilstein (yellow) factory front struts on 2014-2015 models.
Driveline: RWD models may require driveline modification.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Wheels / Tires: Factory 18" wheels cannot be reinstalled with this kit due to steering interference. Factory 20" wheels with a maximum 6.25" backspacing can be used. Follow recommended wheel/tire specifications to ensure proper fitment and minimize the need for trimming.
Application Summary:
| Year |
Make/Model |
| 2007-2015 |
Toyota Tundra |
This item is a package with the following components:
| Attributes |
| Accommodates Factory Wheels |
No |
| Adjustable |
No |
| Alternate Part Number |
ZONT1 |
| Back Spacing |
5.5" |
| Back Spacing 2 |
6.25" |
| Back Spacing 3 |
6.25" |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Finish |
Powdercoat |
| Front Lift Height |
5" |
| Front Lift Method |
Knuckle & Drop Cross-Member |
| GTIN |
00810156367816 |
| Hazardous Material Code |
N |
| Installation Difficulty |
3 out of 5 |
| Installation Time |
8 hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Type |
Lift Kit |
| Max Tire Size |
35 x 12.5 |
| Max Tire Size 2 |
35 x 12.5 |
| Max Tire Size 3 |
35 x 12.5 |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Height |
3" |
| Rear Lift Method |
Cast Blocks |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| SDR Required Flag |
N |
| Wheel Size |
18 x 9 |
| Wheel Size 2 |
20 x 9 |
| Wheel Size 3 |
22 x 9 |
